How to set up Wi-Fi on tablets with different operating systems
A tablet is a modern and widespread gadget in our time, and it is not surprising that many users who have it are interested in the question of how to set up wi fi on a tablet, since in this case you cannot do without using Wi-Fi networks. If you are not too orientated in modern multifunctional mobile devices, and you need Internet access, then it will not hurt to find out how to set up a wireless Wi-Fi network on the most popular mobile OSes. It should be noted that all of the settings below are also relevant for tablet PCs and Android phones.
Setting up Wi-Fi on a tablet with Android OS from Google
The most popular tablet operating system today is Google’s Android OS. For this OS, setting up wi fi on the tablet is not difficult. The following simple steps should be taken:
1) Press the “Menu” button, select “Settings”.
2) You will see that the first item in the list that appears is the Wi-Fi grid module switch. You need to put this switch in the “On” position, after which your “smart” tablet will independently find Wi-Fi within the range of network action.
3) Wait a bit, giving the tablet time to find the network, and then click on the inscription “Wi-Fi”. You will see a list of all the networks that are available for connection. Your grid will also be in the list, you just have to select it by pressing and enter the appropriate access key to it. If you do everything correctly, the status “Connected” will appear near the network name.
It may happen that the tablet cannot connect to the wi-fi after the status “Obtaining an IP address” or the connection has taken place, but it is impossible to open a single page. In this case, in the “User” and “Advanced” sections, write down the DNS settings and IP addresses that you will get from your provider.
Set up a wireless Wi-Fi network on an iOS tablet
Wi-Fi setup on an Apple tablet
If you have an iPad or equivalent, you’re lucky! Well, there is nothing surprising in the fact that you will want to use the gadget almost everywhere and everywhere. This means that you just need to know how to set up Wi-Fi on an Apple tablet. So, follow the instructions below.
1) To connect to a wireless network, go to the “Settings” section and select “Wi-Fi”.
2) Slide the “Wi-Fi” switch to the “On” position.
3) Wait a while until the tablet itself finds the networks located around which are available for connecting. You only need to mark your network, which will appear in the list of available.
4) Note that if an icon with a lock is located next to the name of the network, this means that the network is protected by a special security key. If such an icon appears near the network that you want to connect to, then you need to first find out the key to the network and enter it in the corresponding field when connected. If the connection is successful, you will see an icon with an antenna image on top (the number of strips on the antenna is an indicator of signal quality, strength).
If your network is not in the list of available networks, do not be alarmed. This means that you will need to configure the hidden Wi-Fi network on your iPad. This is not at all difficult to do. In order to connect to a hidden network, select “Another network”, enter the name of the network you need, its security type (you can check with your provider) in the field, and set the network security key. When you enter all this data, the network will immediately appear in the list of available. If the information is entered correctly, you can easily connect to Wi-Fi.
Setting up Wi-Fi on a tablet with Windows 8
With the release of the Windows 8 operating system, almost all tablet manufacturers massively began to produce gadgets running this OS. Some users believe that this Microsoft product is still a little “damp” and it would not hurt to finalize it somewhere. But this is a purely individual attitude, and in any case, there are a lot of fans of the G8. If you are one of them, then you need to know how to configure wi fi on a tablet with this “on board” operating system. In the case of Windows 8, this is very simple.
To begin with, the interface of the new OS version is switchable: there are Metro UI and a traditional desktop. If you have a “tiled” interface running, you can either go to the desktop, or press the combination of “Win” + “I” buttons, and then select “Wi-Fi” in “Setting Charm”. Then proceed as follows.
1) On the desktop, go to the “Taskbar” and click on the line “Network Connections” (antennas) there. You will see a panel with a list of networks available for connection.
2) Select the desired network and click on the “Connect” item. When the system asks you to enter a password, enter your network security key.
3) If the connection was successful, you will see the status “Connected”.