How to connect wifi yourself
Using Wi-Fi at home is very convenient. This allows you to get rid of wires, which cause a lot of inconvenience, and open access to the Internet for any portable…

Continue reading →

Virtual addiction: went online and never returned
A few years ago, people could not even imagine that using various information, conducting trainings and communicating with friends would be possible without leaving home. Currently, the Internet opens up…

Continue reading →

Information Protection in Computer Networks: Antivirus Solutions
If earlier the transfer of dangerous software (software) took place mainly on such media as floppy disks, optical disks, and so on, then in the conditions of the rapid development…

Continue reading →

How to set up a monitor

How to properly configure the monitor (brightness, contrast, color)
All modern OSs are built on a graphical interface, so the key aspect in the work is the correct calibration of the monitor. Productivity, image quality and the ability of the eyes to withstand the load longer depends on a quality image. If you want to keep your eyesight, follow the simple tips below.

It’s worth mentioning right away that modern LCD and TFT monitors are almost impossible to fine-tune. All the characteristics in them are “out of the box”, minor parameters can be corrected, but even this is often enough to get a good warm picture.

Testing preparation and procedure
For calibration, 2 simple steps should be taken:

have a test picture;
adhere to the sequence during the adjustment process.
There are several useful test programs that are ideal for home use. These include the Nokia Monitor Test and Liyuma Monitor Test. Additionally, check out the supplied CD, which should be in the box with the monitor. Often, the manufacturer supplies the products with additional calibration software.

Brightness and contrast are options that maximize the impact on consumer qualities of the device. They are customizable based on the type of activity. The manufacturer has provided several presets for comfortable operation:

text;
graphics;
video;
games;
internet etc.
In standard mode, contrast and brightness minimize eye strain to comfortable levels. Since everyone has their own preferences, the adjustment is carried out individually. Often it all comes down to lower brightness.

The purpose of the graphic image preset is to provide true color reproduction across all ranges. This is no longer subjective, because there are standardized scales sRGB and Adobe RGB. The manufacturer of the monitor indicates in the specifications the coverage of these ranges as a percentage. Looking to work with graphic editors? Get the option with 100% coverage. Check your own screen allows utilities like Nokia Monitor Test.

Video mode provides optimal settings for watching videos, movies, TV shows and cartoons. Everything here is also subjective and determined by personal addictions. However, it is worth considering the following parameters:

general illumination;
type of picture (bright or dull);
distance to the monitor.
If the work is carried out exclusively with electronic documentation, where the white background dominates, it is strongly recommended to lower the brightness, otherwise the eyes will quickly get tired.

Image size and position
Monitors allow you to adjust the position of a visual object. With proper calibration, the center of the displayed image clearly coincides with that of the screen. Black lines on the side or top / bottom are not allowed. Adjusts the position of the image along two axes independently of each other.

There may also be geometric distortions that make the image look like a trapezoid, distorting the show jumping. Test geometric shapes should be equally well displayed anywhere in the monitor, with clear outlines.

Moire – a general definition of patterns and stains that appear when viewing small objects of the same type. Such occur if different grids with different frequencies are superimposed on each other. With the release of LCD panels, moire has almost exhausted itself.

Features of TFT monitors
As mentioned above, LCD devices are initially poorly regulated. All settings in them were added at the factory. Often you can use ready-made presets (blanks), although manual mode is also provided.

LCD monitors may have two potential flaws:

uneven brightness of the backlight or colors (deformation of the matrix used or factory defects of LED lamps). Fortunately, the marriage is checked immediately before purchasing the product;
Defective “broken” pixels are non-working screen elements that exhibit a static color (based on RGB color rendering). Theoretically, this is not a marriage, but not everyone wants to have such a monitor.
Software calibration
Windows has its own methods for debugging images on the monitor. To configure, go to “Start” and enter the command “dccw” in the search bar. The calibration instructions are very detailed and do not require special skills. It takes no more than 5-10 minutes, depending on the user’s preferences.

At the end, perform the font smoothing procedure using the Clear Type technology and you can complete the process. The monitor is now ready for everyday use.

Do the calibration immediately after purchasing the device to maximize its potential in the future.

How to connect to the Internet bypassing the provider
Since the law on Internet censorship began to operate in our country, many users have encountered the problem of visiting a huge number of Internet resources. I must say that…

...

How to connect to a proxy server: methods and instructions
There are many ways you can connect to a proxy server. Sometimes for this it is enough to properly configure the computer device itself, and sometimes you only need to…

...

How to choose an antivirus
If important files disappeared without a trace from the computer, some programs began to work incorrectly, and when turned on, the system reports that the PC is completely blocked, there…

...